Fast, Reliable Gate Parts & Welding Across Burlingame
Gate parts and welding repair in Burlingame typically runs $180–$650 depending on whether you’re dealing with corroded coastal hardware on the Bayshore corridor or structural stress from steep driveway grades in Burlingame Hills. Most hinge replacements, roller swaps, and post repairs are completed same-day. Call (510) 616-4869 for a free estimate.
We’ve been driving out to Burlingame from our Hayward base for years, and we know the territory well — from the fog-drenched blocks near the Bayfront to the winding hillside streets above the Caltrain corridor. Our Gate Parts & Welding team handles everything from rusted-through hinges on 1930s wrought-iron gates to custom-fabricated posts for modern automated systems. If you’re in Burlingame and your gate is dragging, sagging, or seized up, we’ll diagnose it on the spot and fix it without outsourcing to a third-party welder.
Why Prime Gate Solutions Alameda Is Burlingame’s Preferred Gate Parts & Welding Company
Brian Robinson, our owner and lead technician, still answers the phone and shows up with the welder. That’s 27 years of gate-only experience on your driveway, not a rotating subcontractor learning your system on the fly. In Burlingame’s split terrain — flat bayside to steep hillside — that depth matters. We’ve replaced operators in Burlingame Hills that three previous “technicians” misdiagnosed as brand failures.
Our 553 verified reviews averaging 4.9 stars include plenty from Burlingame homeowners who found us after general handymen couldn’t source heritage-compatible hardware or fabricate custom rail sections. We’re typically on-site in Burlingame within 45–60 minutes during business hours, and we carry parts for all nine major brands we service — LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
We also understand what the marine layer does here. Burlingame’s persistent summer fog keeps metal damp for hours each morning, even when the forecast is clear. That moisture, combined with salt-laden air on eastern blocks near the Bay, degrades untreated ferrous hardware faster than owners expect. We’ve learned to spec stainless and coated components as standard for Burlingame jobs, not upgrades.
Our Gate Parts & Welding Services in Burlingame
Hinge Replacement
Gate hinges are the first casualty of Burlingame’s coastal climate. On the Bayshore corridor and eastern blocks of 94010, we regularly find hinges rusted solid after just 4–6 years — half the lifespan you’d see in drier Peninsula cities. We stock heavy-duty ball-bearing hinges in galvanized and stainless steel, and we can fabricate custom offset hinges for older gates in Burlingame Park and the Easton Addition where modern standard sizes won’t fit the original post spacing. A typical hinge replacement in Burlingame runs $180–$320 for a residential swing gate.
Post Replacement
Gate posts take a beating in Burlingame Hills, where steep grades transfer enormous lateral force into the post every time a heavy gate swings. We’ve replaced posts on Skyline Boulevard-area properties where the original installer set a standard 4×4 steel post in shallow concrete on a 12% grade — the post leaned within two years. We use deeper footing specs, heavier wall thickness, and on-site welding to match existing rail profiles. Post replacement in Burlingame typically costs $450–$850 depending on depth, concrete work, and whether we’re matching heritage detailing.
Rail Repair & Custom Welding
Our in-house welding capability means we don’t send your gate out to a fabrication shop and hope it comes back right. We repair cracked welds, replace rusted rail sections, and fabricate entirely new components to match existing profiles. This is critical for Burlingame’s 1920s–1950s housing stock — the Spanish Colonial Revival and Tudor gates in Easton Addition often have ornamental scrollwork or specific rail dimensions that no supplier stocks. Brian welds these repairs himself, on-site, with a mobile rig. Custom rail repair and welding in Burlingame generally runs $280–$650.
Gate Rollers & Track
Sliding gates in Burlingame suffer from debris in track systems and premature roller wear from coastal grit and moisture. We replace steel rollers with sealed nylon or UHMW rollers that don’t rust, and we realign track systems that have shifted on hillside properties. Roller replacement is usually $140–$260; full track realignment or replacement runs $320–$580.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burlingame
We work on your brand — literally. Our trucks carry parts and diagnostic tools for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. That means when your operator fails on a Saturday morning in Burlingame, we’re not ordering parts and coming back next week. We’ve got the circuit boards, gear assemblies, limit switches, and safety sensors in stock. For welding and fabrication work, we source compatible hardware from multiple suppliers so we’re not locked into a single vendor’s catalog. Fast turnaround matters when your gate is stuck open on a Hillsborough Avenue property or jammed shut at a small commercial building near the Broadway corridor.
Common Gate Parts & Welding Problems We See in Burlingame Homes
- Salt-air corrosion on hinges and latch hardware near the Bayshore corridor. The combination of daily fog and Bay proximity eats untreated ferrous metal. We see hinges frozen solid and strike plates crumbling after 3–5 years on eastern blocks of Burlingame — hardware that would last 10+ years inland.
- Residential-grade gate operators overheating on Burlingame Hills inclines. Standard swing-gate motors rated for flat installation strain at full torque on 10–15% grades, burning circuit boards and stripping gears. The real fix is a heavy-duty operator with slope compensation and recalibrated force limits.
- Weld-point failure on original 1920s–1950s ornamental wrought-iron gates. In Easton Addition and Burlingame Park, untreated ferrous welds from decades ago meet daily moisture and rust through. We grind out the old weld, prep the joint, and lay in fresh penetration with matching filler rod.
- Gate rollers seizing from coastal grit and moisture infiltration. Even “sealed” rollers eventually take in enough Burlingame fog residue to bind. We upgrade to fully sealed nylon or UHMW rollers with stainless axles on replacement.
Pricing for Gate Parts & Welding in Burlingame, CA
| Service | Typical Range in Burlingame |
|---|---|
| Hinge replacement (pair, residential) | $180 – $320 |
| Gate roller replacement (set) | $140 – $260 |
| Rail repair / section replacement with welding | $280 – $650 |
| Post replacement with footing | $450 – $850 |
| Custom fabrication (ornamental, heritage match) | $380 – $780 |
| Emergency same-day service call | $120 – $180 + parts |
What moves you up or down within these ranges? Three factors specific to Burlingame: hillside grade (steeper = heavier hardware and more labor), coastal corrosion severity (eastern blocks near the Bay often need complete hardware swaps where inland might see single-part replacement), and heritage compatibility requirements (custom fabrication for Easton Addition or Burlingame Park ornamental gates takes more time than standard panel work). We quote upfront before starting — call (510) 616-4869 for your free estimate.
We Also Serve Cities Near Burlingame
Our service radius covers the full Peninsula corridor. We regularly handle gate parts and welding calls in Hillsborough (large estate systems with long driveways), Millbrae (similar coastal corrosion issues), San Mateo (mixed flat and hillside properties), and San Bruno (residential and light-commercial automated gates). Same owner-on-site standard, same stocked parts, same 4.9-star accountability.
Serving Burlingame, CA — Our Local Coverage Area
We’re based in the Burlingame area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Parts & Welding in Burlingame
Salt-laden air from San Francisco Bay, combined with daily fog moisture, accelerates galvanic corrosion on standard steel hinges by 2–3× compared to drier inland Peninsula cities. We replace them with 316 stainless steel or hot-dip galvanized hinges rated for marine environments, which typically last 12–15 years even on eastern Burlingame blocks. Call (510) 616-4869 for an exact quote — estimates are free.
The previous installer likely used a residential-grade operator without slope-compensation settings, forcing the motor to run at maximum torque every cycle until it overheats and fails. We install heavy-duty operators — often FAAC or LiftMaster commercial-class units — with proper grade-rated torque curves and recalibrated force limits. On a Tudor-style home in the Easton Addition, we replaced a corroded LiftMaster swing-gate operator that had been overheating on the steep incline. We installed a heavy-duty FAAC motor with slope compensation and swapped all hinges and rollers for stainless steel and nylon to resist the coastal air. The owner now closes the gate without worrying about rust jamming the latch. Call (510) 616-4869 for an exact quote — estimates are free.
Yes — Brian fabricates custom rail sections, scrollwork, and pickets on-site to match existing profiles. We photograph your gate, measure rail dimensions and spacing, and weld replacement sections that integrate with the original rather than replacing the entire gate. Heritage-compatible hardware for Burlingame’s Spanish Colonial Revival and Tudor gates is a specialty. Call (510) 616-4869 for an exact quote — estimates are free.
Burlingame’s summer marine layer reaches well past the Caltrain corridor — we’ve seen significant hinge and latch corrosion on properties near Burlingame Avenue and El Camino Real, not just the Bayshore edge. Stainless or hot-dip galvanized hardware adds roughly 15–20% to parts cost but typically doubles service life in Burlingame’s fog-driven moisture cycle. For most Burlingame properties, we recommend it. Call (510) 616-4869 for an exact quote — estimates are free.
Standard steel rollers in Burlingame typically need replacement every 5–7 years due to moisture and grit infiltration; upgraded sealed nylon or UHMW rollers last 10–14 years. We inspect roller condition during every service call and recommend proactive replacement when bearings show play or the wheel surface is scored. Call (510) 616-4869 for an exact quote — estimates are free.
Reviewed by Brian Robinson, Owner and Lead Technician at Prime Gate Solutions Alameda, serving Burlingame and the greater Peninsula since 1997.
